GO
GO
Magpul Item# SA056

Magpul Back-up Sights (MBUS) Rear Sight

$55.05MSRP: $57.95
Save $2.90 (5% off)

      

Highlights

Side Zipper
Slip Resistant
8in Height
Waterproof
Breathable
Lightweight
Side Zipper
Slip Resistant
8in Height
Lightweight
Ortholite Insole
Shock Absorption
Slip Resistant
8in Height
Breathable
Lightweight
Shock Absorption
Side Zipper
Slip Resistant
8in Height
Lightweight
Full-Grain Leather
Shock Absorption
Slip Resistant
8in Height
Waterproof
Lightweight
Full-Grain Leather
Shock Absorption
Side Zipper
8in Height
Breathable
Lightweight
Ortholite Insole
Full-Grain Leather
Side Zipper
8in Height
Waterproof
Shock Absorption
Side Zipper
Slip Resistant
8in Height
Waterproof
Composit Toe
Shock Absorption

Magpul Back-up Sights (MBUS) Rear Sight

The MBUS (Magpul® Back-Up Sight) is a low-cost, color injection molded, folding back-up sight. The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform. Made in U.S.A.

  • Impact resistant polymer construction provides light weight and resists operational abuse
  • Spring-loaded flip up sight easily activated from either side or by pressing the top
  • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
  • Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail and provides the same height-over-bore as standard A2 irons
  • Protective wings shield the dual, same plane flip apertures
  • Sight can still be folded with either large or small aperture in position
  • Detent knob easily and positively adjusts windage
  • Weight, w/ hardware: 1.3 oz.
  • Height above rail, stowed: ~0.51 in.
  • Center of aperture to top of rail: 1.42 in.
  • Length, stowed: 2.6 in.
  • Length, deployed: 1.5 in.
  • Windage adjustment: 0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
  • Windage adjustment: 0.5 MOA (0.547"/100m) per click with a 20" sight radius
  • Made in U.S.A.

    NOTE: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.

You might also like //